Product Overview
PET film labels printing is our custom product label printing service built on a polyester film face rather than paper. The label is self-adhesive, printed and cut to your artwork, and supplied either wound on a roll or as cut sheets.
Film is the substrate chosen when a label has to keep its print and stay stuck: products that are handled during assembly, packed tightly, wiped down, stored in humid conditions, or moved between warm and cold environments. We print these labels for electronics and small appliances, automotive components and interior parts, industrial equipment panels and nameplates, household appliances, and consumer packaging that travels through distribution. Choose PET film when the label has to read correctly and look right for the life of the product, not only on the day it is applied.
PET Film Performance
- Water and moisture resistance: the film face and the printed surface stand up to splashes, condensation and damp storage, so the label does not cockle, curl or lose print the way an uncoated paper label can. This is the property behind our waterproof printed labels, used on equipment that is washed down, rained on or moved between humid working areas.
- Scratch and rub resistance: printed PET resists the scuffing that comes from cartons sliding, parts sitting loose in bins or a label being wiped during assembly. Small type, fine detail and code panels stay readable after the product has been through your line.
- Heat resistance: the film and the print hold their shape at the surface temperatures found on warm housings, appliances and process equipment, and they do not soften or lift when a labelled product is packed and shipped in warm conditions.
- Adhesion you can rely on: high peel strength keeps the label in place on moulded plastic, painted or powder-coated metal, anodised surfaces and film packaging. Tell us what the label is going onto, because a low-energy or textured surface needs a different adhesive from a smooth painted panel.
- Weather resistance: the film, the adhesive and the print work as one combination, which is what lets these labels stay on outdoor and industrial equipment, in workshops, on transport and in storage yards without the edges lifting or the print fading early.
- A thin, flexible face: PET film follows gently curved, narrow and small-radius surfaces that a stiff label will not sit flat on, which is why it is used on compact housings and small components as well as on large panels.
- Consistency from run to run: the film, ink and press settings used for your approved sample are recorded and reused, so the second order matches the first. Moving from a sample into volume production without the print shifting is what buyers expect from an industrial label manufacturer, and it is the part of the job we treat as fixed.
Specifications
| Specification | Detail |
| Label material | Self-adhesive PET film (polyester) |
| Substrate options | PP, PE, PVC for custom vinyl labels, synthetic paper and coated paper |
| Adhesive | Self-adhesive, selected for the surface being labelled |
| Colours | CMYK process and Pantone matching |
| Label dimensions | Made to your artwork dimensions |
| Format supplied | Rolls wound on a core, or cut sheets |
| Artwork files accepted | PDF, CDR or AI, with a physical sample of the label you want |
| Typical applications | Industrial nameplates, automotive components, appliance panels, FMCG product label sticker printing |
Materials, Inks & Sourcing
- PET film: our standard film substrate, a smooth polyester face that carries fine type, small barcodes and solid colour blocks cleanly and stays flat through printing and cutting.
- Other stocks on the same presses: synthetic paper, pearlescent film, BOPP, PE, standard coated paper and PVC. PVC is the stock behind custom vinyl labels, where the label needs to flex and conform rather than stay rigid.
- Adhesive and liner: self-adhesive stock selected for the surface the label goes onto, with a liner that releases cleanly whether labels are applied by hand or on an automatic line.
- Inks and colour systems: CMYK process printing and Pantone-matched inks, so a brand colour can be held to a reference instead of being eyeballed from one run to the next.
- Finishes: lamination for a protective gloss or matte surface, and hot stamping for metallic detail. Matte silver labels are one of the specialist finishes we print, used where a metal-look face is wanted for nameplates and equipment identification.
- Raw material sourcing: we buy self-adhesive stock from established manufacturers such as Avery Dennison, UPM and 3M, which is what keeps the substrate consistent from one order to the next.
- Compliance: the labels are manufactured in compliance with EU RoHS standards, toy labels comply with phthalate testing standards, and the inks comply with environmental protection testing standards for heavy metals.
Printing & Finishing Options
| Process | What it is used for |
| Printing method | UV printing and rotary label printing |
| Press equipment | 6-colour rotary plate printing, UV plate printing and roller screen printing |
| Screen printing | Roller screen printing for heavy ink coverage on large colour blocks, warning panels and solid backgrounds |
| Hot stamping | Automatic hot stamping for metallic and foil accents |
| Special finishes | Matte silver labels, pearlescent film and scratch-off foil |
| Lamination | Protective gloss or matte layer over the printed surface |
| Embossing and texture | Raised or textured detail for a tactile finish |
| Die cutting | High-speed die cutting to your outline |
Print Quality & Colour Control
Colour and print accuracy are controlled from the environment outward. Our printing area runs as a cleanroom with automatic temperature and humidity control, and the presses carry dust extraction equipment, because airborne dust and shifting humidity are what cause uneven ink distribution and patchy colour across a run. With those conditions held steady, the same artwork, ink and press settings reproduce your approved colour on the next batch instead of drifting.
Every custom product label printing run is printed against CMYK or Pantone references, and printed rolls are checked for consistency, registration and the legibility of the small type and fine detail that film substrates are chosen for. If you have a Pantone chip or a previous label to match, send it with the artwork so the colour target is agreed before the run starts.
Applications & Environments
- Electronics and small appliances: rating plates, model and serial panels and control labels on housings that are assembled, packed and handled on the line.
- Automotive components and interiors: part identification, component and assembly labels and interior trim parts, where the label has to sit flat on a moulded or painted surface and stay there.
- Industrial equipment and control panels: nameplates, warning and instruction panels and asset tags on machinery that is cleaned, serviced and moved around a plant.
- Household appliances: control panels, energy and rating labels and serial plates that have to stay legible through years of use in a kitchen or utility room.
- FMCG and consumer packaging: barcode, ingredient and information panels, where FMCG product label sticker printing has to run at packaging-line speed and still arrive on the shelf looking crisp.
- Outdoor and industrial environments: equipment kept outside, in workshops or in transit collects rain, dust and temperature swings, and this is where waterproof printed labels with a weather-resistant print earn their place.
Custom Size & Artwork
- Start from what you already have: a physical label to reproduce, plus the design file in PDF, CDR or AI format. Where the label exists today, a product label printing sample from your current supplier is the fastest reference for us to match.
- Confirm the substrate and the finish: PET film is standard, a different stock where the surface or the environment calls for one, with lamination, hot stamping or a specialist finish added where you need it.
- Agree the cut: labels are die-cut to your outline, either kiss-cut so the liner stays intact for machine application, or cut fully through for labels applied by hand. Send the dimensions, or we measure from your sample.
- Run a prototype: a short run lets you check print, colour, cut quality and adhesion on your actual product before bulk production is released.
- Approve and print: once the prototype is signed off, the bulk run follows the same artwork, ink and press settings.
- Tell us how the label will be applied: hand application or an automatic labelling head decides the unwind direction and the roll layout we set.
Production Capacity & Supply
Capacity decides whether a label programme keeps up with your build schedule. Our lines run as high-speed automated production with a capacity of up to 2.5 million sheets per day, and raw material stock is held deep enough that a substrate change or a jump in volume does not stall a run.
Lamination, hot stamping, die cutting and rewinding all happen in the same building as the printing, so a job never sits waiting between suppliers. Because printed labels, die-cut parts and silicone components are produced under one roof, a project that needs all three can be planned as a single supply instead of three separate purchase orders. That structure is also where the cost logic of large-volume work sits: material is bought at scale, and the industrial label manufacturer lines that produced your sample can carry the volume that follows.
Ordering & Delivery
- Minimum order quantity: 3,000 pieces for a custom product label printing
- Prototype lead time: 3–5 days.
- Bulk delivery: 5–9 days after the prototype is approved.
- Order cycle: small buyers without a factory audit are usually served in about 5–15 days; larger accounts requiring a factory audit should plan on about 30–90 days, the normal cycle for an industrial label manufacturer working with automotive and medical programmes.
- Shipping: express delivery and standard shipping are both available, and we confirm the method against your deadline.
- After-sales service: we provide comprehensive after-sales support to make sure the labels perform in your process as approved; if something is not working as it should, raise it with your contact and we will work through it with you.
- Contact for a quote: email market@huatech-vietnam.com, or phone, Zalo and WhatsApp on +84 395 237 345.
Automatic Labelling Line Compatibility
- Tell us the machine before your product label printing order goes on press. The labelling head make and model, the label pitch it is set for and a photo of the web path tell us more than a dimensioned drawing, because tamp, blow-on and wipe-on heads each present the label at the peel plate in a different way.
- Unwind direction and peel side. A roll wound for a head that peels from the top of the roll will not feed one that peels from underneath. We need to know which side of the web your applicator takes the label from and which edge leads, so the printed face reaches the peel plate the right way up.
- Kiss-cut depth for machine application. Automatic lines need the label cut while the liner stays intact, so the web remains one continuous strip through the machine; labels you apply by hand can be cut fully through instead. Die depth is set and checked on the roll, because a die that nicks the liner turns into a web break at the peel plate.
- Gap, pitch and sensor marks. The space between labels and the position of any eye-mark are matched to the gap sensor or registration mark your head reads, so the machine feeds one label per cycle instead of drifting out of step down the roll.
- Liner release at your line speed. The liner is matched to how fast the machine runs and how tightly it turns: too light a release and the label comes away early, too heavy and it drags or tears at the plate. Give us the line speed and we will confirm the liner before printing starts.
- Core, roll envelope and winding. Rolls are built on the core your spindle takes, wound to a diameter and weight your unwind stand, dancer arm and splice table can carry, and wound firm and square so they do not telescope or wander between the guides when the applicator accelerates.
- Hand application, if that is what you do. Labels applied by hand can be supplied as cut sheets, which removes the winding question altogether. Tell us which method you use at the quotation stage so the cutting and packing are set up for it.
- Trial roll before the bulk release. Send the applicator details with your enquiry and we will wind a short roll to run on your own line. If labels lift at the peel plate, double-feed or miss the product, the winding, gap and liner settings are corrected before the main run is printed.
Quality Control & Inspection
Quality is controlled at every stage at Huatech Vina, not only at the end. Our 12 in-house engineers agree the inspection points with you before production starts; first articles are checked and approved, and our QC team samples parts as the run moves through. Our quality system is certified to ISO 9001, ISO 14000 and IATF 16949, and we support the factory audits and third-party inspections larger customers arrange. Shipments leave with the inspection records your incoming team needs, and anything outside the agreed specification is held and reported before it goes out.
FAQ
Q1. Can you print barcodes, QR codes and other variable data on the same label?
Yes. Barcodes, QR codes, serial numbers and batch codes are printed inline, so the code panel comes out of the same product label sticker printing run as the rest of the design rather than being added in a second pass or by a second supplier. The code area is checked for legibility along with the rest of the print.
Q2. Do you produce custom vinyl labels as well as PET film labels?
Yes. PET film is our standard film stock, and the same presses run PP, PE, PVC for custom vinyl labels, synthetic paper and coated paper. If the label has to bend with a flexible surface, vinyl is often the better starting point; if it sits on a rigid housing and has to survive handling and moisture, PET is usually the one to specify. Send us the surface and the conditions and we will confirm the stock.
Q3. How large or how small can a single label be?
The dimensions are customizable in any size and shape, so one product label printing run can carry a small component label with fine type alongside a large equipment panel. Size matters less than artwork: give us the dimensions, or the physical sample to work from, and we will confirm how the type, codes and spacing come out at that size.
Q4. Will the rolls run on our automatic labelling equipment?
They can. Tell us the core size, unwind direction and label orientation your applicator uses, and we wind the product label printing roll to match, with the label strip and liner set up so the applicator peels cleanly. Rolls are wound on a cardboard core, and if the labels are applied by hand instead, say so and we will arrange the roll layout around that.
Q5. Are matte silver labels available alongside printed PET film labels?
Yes. Matte silver labels are one of the specialist finishes we print, used where a metal-look face is wanted for nameplates and equipment identification. They can be printed and supplied in the same order as your PET film labels, so one delivery covers both.
Q6. Are these labels suitable for outdoor and industrial use?
For work outdoors, in workshops or on equipment in transit we combine a film face, a weather-resistant print and an adhesive matched to the surface, which is how our waterproof printed labels are specified. Tell us what the label is going onto and what it has to survive — rain, wash-down, dust, cleaning agents or temperature swings — and we will confirm the combination before the run.
- Facebook: Follow Huatech Vietnam
- Contact Us: Request a Quote
- Email: market@huatech-vietnam.com
- Phone/Zalo/WhatsApp: +84 395 237 345








